Developing a Cost-Effective Approach for Enhancing the Rheological and Mechanical Behavior of High Strength Self-Compacting Concrete

سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 581

فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_QSEJ-8-1_004

تاریخ نمایه سازی: 26 خرداد 1398

چکیده مقاله:

Despite the numerous advantages of using concrete with high strength capacity, the brittle behavior of high strength concrete (HSC) and higher production cost has limited its use in the construction industry. This research aims to develop a cost-effective approach for production of high strength self-compacting concrete with desirable performance in either compressive or tensile loading condition. To reach this purpose, 18 mixtures were cast initially with different w/c, binder, and silica-fume percentages. The results show that it is possible to produce high strength self-compacting concrete economically without using any additives such as silica-fume. Afterward, an innovative reinforcing technique using hexagonal wire mesh (HWM) were introduced for enhancing the HSC performance. The results show that HWM is able to enhance HSC behavior in both tensile and compressive loading condition. Finally, an economic analysis was conducted and the optimum HWM properties are selected according to the analysis results.  

نویسندگان

Sahand Mardi

aDepartment of Civil Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran

Morteza Bastami

Department of Structure, International Institute of Earthquake Engineering and Seismology (IIEES), Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • State-of-the-art Report on High-Strength Concrete. ACI 363R-92, American Concrete Institute ...
  • Report on High-Strength Concrete. ACI 363R-10, American Concrete Institute Committee ...
  • S. B. Singh, P. Munjal, and N. Thammishetti, Role of ...
  • S. Zhutovsky and K. Kovler, Influence of water to cement ...
  • J. C. Lim and T. Ozbakkaloglu, Influence of silica fume ...
  • B. H. AbdelAleem and A. A. A. Hassan, Development of ...
  • J. J. Chen, P. L. Ng, L. G. Li, and ...
  • Y. Ju, K. Tian, H. Liu, H.-W. Reinhardt, and L. ...
  • M. Benaicha, X. Roguiez, O. Jalbaud, Y. Burtschell, and A. ...
  • EFNARC, Specifications and Guidelines for Self-Compacting Concrete, EFNARC, UK, pp. ...
  • AFGC. Recommandations pour l’emploi des bétons autoplaçants; Janvier 2008. ...
  • R. Abaeian, H. P. Behbahani, and S. J. Moslem, Effects ...
  • W. Abbass, M. I. Khan, and S. Mourad, Evaluation of ...
  • E. Molaei Raisi, J. Vaseghi Amiri, and M. R. Davoodi, ...
  • M. Pourbaba, E. Asefi, H. Sadaghian, and A. Mirmiran, Effect ...
  • W. Xue, L. Li, B. Cheng, and J. Li, The ...
  • H.-O. Shin, K.-H. Min, and D. Mitchell, Confinement of ultra-high-performance ...
  • B. Boulekbache, M. Hamrat, M. Chemrouk, and S. Amziane, Flexural ...
  • A. P. Lampropoulos, S. A. Paschalis, O. T. Tsioulou, and ...
  • ASTM C39 / C39M-18, Standard Test Method for Compressive Strength ...
  • ASTM C1611 / C1611M-14, Standard Test Method for Slump Flow ...
  • ASTM C1621 / C1621M-17, Standard Test Method for Passing Ability ...
  • ASTM C1610 / C1610M-17, Standard Test Method for Static Segregation ...
  • ASTM C150 / C150M-17, Standard Specification for Portland Cement, ASTM ...
  • ASTM C494 / C494M-17, Standard Specification for Chemical Admixtures for ...
  • ASTM A975-11(2016), Standard Specification for Double–Twisted Hexagonal Mesh Gabions and ...
  • نمایش کامل مراجع