arametric study of outer-brace SCFs at saddle and crown positions of right-angleptwo-planar tubular DKT-joints of offshore jacket structures
محل انتشار: پنجمین همایش بین المللی صنایع فراساحل
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 657
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
OICIRAN05_001
تاریخ نمایه سازی: 26 شهریور 1395
چکیده مقاله:
In the present paper, a set of parametric FE stress analyses is carried out for two-planar welded tubular DKT-jointsunder two different axial load cases. The analysis results are used to present general remarks on the effect ofgeometrical parameters on the stress concentration factors (SCFs) at the inner saddle, outer saddle, crown toe, andcrown heel positions on the main (outer) brace. Based on the results of finite element analyses which are verifiedagainst the experimental data, a complete set of SCF database is constructed. Then a new set of SCF parametricequations is developed through nonlinear regression analysis for the fatigue design of two-planar DKT-joints underaxial loads. An assessment study of these equations is conducted against the experimental data and the satisfaction ofthe criteria regarding the acceptance of parametric equations is checked. The hot-spot stress method for fatigue design of offshore structures relies on the accurate prediction of SCFs. Significant effort has been devoted by researchers to the study of SCFs in various uni-planar tubular connections. Nevertheless, for multi-planar joints covering the majority of practical applications, very few investigations have been reported due to the complexity and high cost involved. Despite the frequent use of two-planar DKT-joints in the offshore jacket structures, this is the first research proposing design formulae for the SCF calculation in such tubular joints
کلیدواژه ها:
Offshore jacket structure ، Multi-planar tubular joint ، KT-joint ، Fatigue ، Stress concentration factor (SCF) ، Parametric equation
نویسندگان
Hamid Ahmadi
Assistant Professor, Faculty of Civil Engineering, University of Tabriz
Mohammad Ali Lotfollahi-Yaghin
Professor, Faculty of Civil Engineering, University of Tabriz;
Shadi Asoodeh
MSc Student, Faculty of Civil Engineering, University of Tabriz
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :